Your pool pump is the heart of your circulation system. When it stops working correctly, your entire pool suffers. Here are common pump problems and what they mean:
Problem 1: Pump Won’t Start
Possible causes:
- Tripped circuit breaker or blown fuse
- Faulty capacitor or motor
- Overheating shutdown
- Clogged impeller
Quick check: Reset the breaker. If it trips again immediately, there’s a serious electrical issue — call a professional right away.
Problem 2: Noisy Operation
Different sounds indicate different problems:
- Grinding or screeching: Bad bearings or worn-out motor
- Rattling: Loose parts or debris in the impeller
- Humming without starting: Bad capacitor or locked motor shaft
Problem 3: Low or No Flow
If water isn’t circulating properly:
- Check for clogged skimmer, pump basket, or impeller
- Inspect the filter — a dirty filter restricts flow
- Check for closed or partially closed valves
- Look for air leaks in the suction line
Problem 4: Leaking Pump
Common leak points:
- Shaft seal: Most common cause — water leaks from under the pump
- Pump housing: Cracks or worn gaskets
- Threaded fittings: Loose connections
Problem 5: Pump Motor Overheating
If the pump shuts off after running for a while:
- Check for adequate airflow around the motor
- Ensure the pump isn’t running dry
- Look for voltage issues
When to Call a Pro
If you’ve checked the basics and the problem persists, don’t wait. Continuing to run a faulty pump can cause further damage to your entire pool system. Our repair team can diagnose issues quickly and get you back to swimming.
Need a repair? We service all major pump brands.